If the bars are raising it means that the weather is getting better due to the increase of air pressure
If the bars go down , it means the air pressure has dropped and the weather is expected to get worse from the
present time “0h”
Remarks :
Moving your weather from one floor of a building to another floor will affect the accuracy of your Receiver, which
should operate at the same altitude all the time , if you move it to a new location , it will take 12-24 hour to get
stable and accurate again.
As you go higher in the air , the atmospheric pressure decreases, the exact pressure at a particular altitude
depends of weather conditions , but a couple of approximations and a formula can give you a general idea of how
pressure decreases with altitude, a rule of thumb for the altimeter correction is that the pressure drops about 1
hPa for each 8 meters of altitude gain , these rules work quite well for elevations or altitudes of less than two or
three thousand feet.
Our Receiver provides next 12-24 hours weather forecast , it may not match with the current weather condition
outside.
TO Read Maximum-Minimum Indoor /Outdoor Temperature And Humidity:
Press the ” UP/MEM (B2) ” button to show the maximum indoor /outdoor temperature and humidity with “MAX”
icons appearing on the display.
Press the “ UP/MEM (B2)”button again to show the maximum indoor / outdoor temperature and humidity with
“MIN” icons appearing on the display.
In “MAX/MIN” mode ,hold ” UP/MEM ( B2) ” button for 3 seconds to clear the recorder max/min reading.
Press ” DOWM (B1) ” button to select indoor/outdoor temperature in Celsius(
)mode or Fahrenheit (
)
mode.
Display Outdoor Temperature :
Press “ CHANNEL(B5)” button to show the 3 channel temperature, the sequence is shown as follow:
If only one sensor is registered , press “ CHANNEL (B3) “ button will has no function
Hold “CHANNEL(B3)” button for 3 seconds to cancel unused channel manually, it will automatically search
and register a new channel again if a new channel is received , if there no temperature display in existing
channel (“--- ---“ is display on the LCD), hold “ CHANNEL (B3)” button for 3 seconds to cancel that channel
and receive the channel again.
Wireless Remote Sensor Registration Procedure :
The wireless remote sensor will automatically transmit temperature to the receive (clock ) after batteries
inserted .
For having more than one external transmitter ,select the channel (CH1-CH2-CH3) to ensure each wireless
remote sensor is transmitting different channel before inserting batteries, the channel selecting switch (E2)
button is at the back of the wireless remoter sensor.
Press “
/
“ (E3) button on the wireless remote sensor , to select displayed in Celsius mode or
Fahrenheit mode
Press
“CHANNEL”(B3)
Press
“CHANNEL”(B3)
Press
“CHANNEL”(B3)
Содержание 695159
Страница 7: ......
