Balance 695159, Инструкция по эксплуатации

Страница: 3 / 7

Part D-LCD
D1: Outdoor temperature / humidity display D2: RF icon
D3: Low battery display D4: Channel
Part E- Buttons
E1: “ Reset “ button E2: “Channel select switch “ button
E3: “ /
”
button
Part F-Structure
F1: Transmitter Lens F2: Transmitter indication LED
F3: Gases hole F4: Wall mount hole
F5: Battery door F6: Battery compartment
Manual Time Setting :
The setting sequence is shown as follow: Year-Month-Date- Time Zone - 24 HR -Hour-Minute-Weekday Languages
In time mode, press and hold down the ” SET(B6) ” button for 3 seconds, the year display 2011 starts to flash,
now use ”+(B1) or ”-(B2)” buttons to set the correct year.
Press” B6 ” to confirm your setting, the month display starts to flash , Now use “+(B2)” or “–(B1)“ buttons to set
the correct month.
Press ” B6 ” to confirm your setting, the date display starts to flash , Now use “+(B2)” or “–(B1)“ buttons to set the
correct date.
Press “B6” to confirm your setting, the “00” display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set correct
time zone.
Press “B6” to confirm your setting, the12/24 HR display starts to flash. Now use “+(B2) ”or “–(B1)“ buttons to set
correct time format.
Press “B6” to confirm your setting, the hour display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set
correct hour.
Press “B6” to confirm your setting, the minute display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set
correct minute.
Press “B6” to confirm your setting ,the language selection for the weekday displays states to flash, Now use
“+(B2)” or “–(B1)“ buttons to select a language..
Press “B6” to confirm your setting and to end the setting procedures.
After 10 seconds without pressing any button the receiver switches automatically from setting mode to Normal
clock mode.
Setting The Daily Alarms :
In time mode, press ”ALM SET (B5)” button one time, and the “
”
icon appears, again press and hold down the
“B2” button for 3 seconds until “AL” hour icon starts to flash, now use ”+(B2)” or "-(B1) “ buttons to set your want
time, and press “B5” to confirm your setting, ” AL “ minute display start to flash, press ”+(B2)” or “–(B1)” buttons to
set you want time. And press “B5” to confirm your setting.
If you want cancel the alarm, please change the alarm mode and press “B5 “ button one time to cancel the alarm,
and the “
”
icon disappears .
To Use Snooze Alarm:
When time reaches your set alarm time ,your clock will give beep sound to wake up, the
“
”
icon will flash..
Press” SNOOZE/LIGHT(B4) ” button once to stop the alarm temporarily, the “ ” icon keeps flashing ,the alarm
will beep again in 5 minutes.