Balance 275947, Руководство пользователя

Страница: 9 / 36

HOW TO READ INDOOR/OUTDOOR TEMPERATURE
1. When it displays the indoor temperature (not Auto-scrolling), press
[CH] button once to switch to channel #1 and display the channel #1
temperature, press [CH] button again will switch to next channel. The
sequences are: Indoor→ Channel #1→ Channel #2 →Channel #3
→Auto-Scrolling→ (repeat).
2. In Auto-scroll mode, the upper LCD will alternately display indoor
temperature and the registered remote temperatures for 4 seconds.
Note: Only registered remote channel(s) will be shown up in the Auto-
scroll mode and unregistered channel(s) will be skipped. The “--._°C”
or “--._°F” will display to prompt the user for a RF loss link in a specific
sensor channel.
3. When received indoor temperature is over +60°C (+140.0°F) or
outdoor temperature is over +70°C (+158.0°F), “HH.H” will appear on
the upper LCD. When received indoor temperature is below -10°C
(+14.0°F) or outdoor temperature is below -50°C (-58.0°F), “LL.L” will
appear on the upper LCD.
HOW TO SET ALERT LIGHT ON INDOOR/CHANNEL #1
Press & hold [ALERT] button for 2 seconds to enter Alert Light setting
mode. Press [▲] or [▼] button to select Alert Light monitor according to
Indoor temperature or Channel #1 temperature. Press [ALERT] to confirm.
Note: The channel #1 Alert light is available only if the channel #1 has been
registered successfully.
1. While the Alert lighting color is set to monitor indoor temperature,
the color of Alert light and LCD backlight will change according to
temperature as in Table 1.
Table 1:
Indoor temperature Over 25.0 °C 20.0°C~ 24.9°C Below 19.9°C
(77.0°F) (68.0°F~76.8°F) (67.8°F)
Mood Light color red purple blue
LCD backlight color red purple blue
2. While the Alert lighting color is set to monitor the external sensor
channel #1, the color of Alert light and LCD backlight will change
according to temperature as in Table 2.
~ 9 ~
(EN)