Balance 275947, Руководство пользователя

Страница: 5 / 36

the Auto-scroll mode, unregistered channel(s) will be skipped.
- Press & hold 2 seconds to activate or deactivate searching mode for
remote sensor.
6. [MEM]
-
Toggle to view the Max/Min reading of the Indoor & Outdoor
temperature.
- Press & hold 2 seconds to clear the Max/Min temperature memories of
Indoor & all Remote.
7. [ALERT]
- Press & hold 2 seconds to enter Mood Light setting mode, use [▲] or
[▼] button to set Mood Light alert according to Indoor temperature or
Channel #1 temperature. Press [ALERT] to confirm.
And one button on the bottom
8. [SNOOZE-LIGHT]
- Press the top of the main unit to activate [SNOOZE-LIGHT] button
to turn on backlight for 10 seconds. Meanwhile, the mood light will
be light up for 10 seconds if the main unit is connecting with the DC
adaptor and the [MANUAL-MOOD-ALERT] slide switch is in the
MANUAL position.
- Stop alarm sound temporary for 5 minutes when alarm sounds.
Note: When the clock is beeping, pressing any button will stop it
except the [SNOOZE- LIGHT] button.
BATTERY INSTALLATION FOR MAIN UNIT
1. Remove the battery door.
2. Insert 3 pieces AAA size 1.5V alkaline battery as indicate by the
polarity;
3. Close the battery door.
Note: Replace the batteries when the low battery indicator appears on
the top-middle of the lower LCD.
BATTERY INSTALLATION FOR REMOTE SENSOR
1. Remove the battery door.
2. Insert 2 pieces AAA size 1.5V alkaline battery as indicate by the
polarity;
3. Close the battery door.
Note: Replace the batteries when the low battery indicator in each
channel appears on the top-left of the upper LCD.
~ 5 ~
(EN)