OUTDOOR GAS CHARBROILER OPERATION MANUAL
9
ACCESSORIES
Instructions For Installing Outdoor Charbroiler
Accessories
Your new Charbroiler has been shipped in several
cartons, partly assembled. Please follow the instructions
below which detail the assembly of shelves, hoods, wind
guards, tank brackets, tank caddy and stand.
1. To install the optional undershelf, mount it over the (4) legs &
casters and tighten w/screws provided.
2. Clamp the optional side mount tank bracket(s) over either the left,
right (or both) two legs w/thumb screws provided.
3. Mount top of stand on legs and tighten w/screws provided.
4. Place broiler on stand. Note that mounting screws for hoods,
wind guards and shelves are provided and must be removed from
outer flange and used to mount accessories.
5. Remove top grate(s) and snap optional side shelves(s) and/or rear
shelf onto unit (screw holes must line up).
6. Re-install top grate(s).
7. Place either the optional Hood and/or optional Wind Guard on top
of the shelve(s) with the screws provided.
8. Position the optional second Wind Guard or optional second Hood
on the unit and fasten with the screws provided.
9. If your unit is equipped with a Tank Caddy, slide it under the
broiler (in the center) and attach with the two Hooks provided for
this purpose.
10. If your unit was ordered with a Richlite Work Deck, place it on the
stainless steel front shelf.
