Baker SterilGARD SG303, Руководство оператора

Страница: 40 / 45

38
not to let the bolts drag on the edge
of the holes while lowering as
burrs may occur on the bolts and
cause threading problems.
Step 7 : With the cabinet resting on
top of the stand assembly, place (1)
¼” flat washer, lock washer, and
hex nut onto each of the bolts.
Tighten after all (4) nuts are
threaded on.
Step 8 : The lift device should be removed if not being used to move cabinet into position within
the room. If the lift device is mobile it may be used to maneuver cabinet into the desired location.
A blanket could also be placed under the leg levelers while sliding the cabinet to avoid scuffing
the flooring.
¼” Hardware