Invivo
2
Plus
UM-14 Version R3.0
Page 35
Invivo
2
Plus User Manual
Internal power socket
6.5
An internal power socket is provided within the workstation chamber. The socket is located on the
left hand side, underneath the rear shelf.
The maximum permissible power rating of equipment connected to the internal socket is shown in
Figure 30;
Figure 30: Internal socket power ratings
Supply voltage
Power rating
120V AC, 60Hz
88W
240V AC, 50 Hz
192W
Internal lights
6.6
2 internal lighting systems are provided for the workstation chamber;
•
Main chamber light.
•
Spot light.
To switch the main chamber light on, press the chamber light switch (item 2 in Figure 9, or item 2 in
Figure 10).
To switch the main chamber light off, press the chamber light switch (item 2 in Figure 9, or item 2 in
Figure 10).
To switch the spotlight on, press and hold the spot pedal on the foot switch control panel (item 3 in
Figure 14). To switch the spotlight off, remove your foot from the spot pedal on the foot switch
control panel (item 3 in Figure 14).
Note
that the spot light should not be used continuously for a period of more than 10 minutes, as
this will cause the spot light to overheat. The spot light should be allowed to cool for a period of 10
minutes after each use.
Rear shelf
6.7
The Invivo
2
Plus workstation has a sliding rear shelf for additional storage within the workstation
chamber. To slide the shelf forwards, pull the shelf towards you with both hands. To slide the shelf
backwards, push the shelf away from you with both hands. The weight limit for the shelf is 12.5kg.
The weight on the shelf must be evenly distributed.