Invivo
2
Plus
UM-14 Version R3.0
Page 18
Invivo
2
Plus User Manual
19.
Socket on indicator
. Illuminates to indicate that the internal socket is switched on.
20.
Condenser fan indicator
. Illuminates to indicate the condenser fan is running.
Control panel – Ultrasonic humidity control
3.3.2
Ultrasonic humidity control is available as an optional accessory on the Invivo
2
Plus. Ultrasonic
humidity is only available at time of order and is not available as an aftermarket upgrade. Figure 10
shows the control panel for Invivo
2
Plus workstations equipped with ultrasonic humidity;
Figure 10: Control panel for Invivo
2
Plus workstations with ultrasonic humidity
1.
Power indicator
. Illuminates to indicate the workstation is connected to the mains power
supply and is switched on.
2.
Chamber light switch
. Press to switch the chamber light on / off. The chamber light switches
off after 1 hour automatically.
3.
Internal socket switch.
Press to switch the internal socket on / off.
4.
Temperature controller.
See section 3.3.3, for more details.
5.
ANO
2
low.
6.
Gas alarm
. Press to switch the gas alarm on / off.
7.
N
2
low
.
8.
Com. Cycle active
.
9.
Interlock purge cycle selector
. Press to switch between the standard and economy interlock
cycles. When the switch is depressed, the economy cycle is selected.
10.
Condenser fan on
. Illuminates to indicate the condenser fan is running.
11.
Socket on
. Illuminates to indicate that the internal socket is switched on.
12.
Humidity controller.
See section 3.3.3, for more details.
13.
Gas change.
14.
Gas demand.
Illuminates to indicate that gas is being injected into the workstation from the
ICO
2
N
2
IC Advanced gas mixer system.
15.
Gas Excess
.
16.
Inner door indicator
. Illuminates to indicate that the interlock inner door is open.
17.
Outer door indicator
. Illuminates to indicate that the interlock outer door is open.
18.
Interlock cycle status aerobic
. Illuminates to indicate that the interlock chamber is in an
aerobic condition and requires purging.