Invivo
2
300
UM-010 R4.0
Page 43 of 48
Invivo
2
300 User Manual
Workstation malfunction
In the event of a workstation malfunction, please check section 7.6.1 for a list of common problems
and solutions. If you cannot find a solution to your problem, please contact your local distributor,
quoting the serial number of your workstation. If the problem is related to the ICO
2
N
2
IC, please contact
your local distributor. The event log will be required to diagnose problems (see UM-011 ICO
2
N
2
IC user
manual for more details).
Common problems and solutions
Workstation general problems
gives a list of common problems and solutions. Please consult this list as a first reference in
the event of a malfunction of your workstation.
Figure 35: Common problems and solutions
Problem
Cause
Solution
The workstation will
not switch on
The workstation is not
plugged in
The mains socket is not
switched on
The mains plug fuse
has blown
The mains fuse has
blown
Plug the workstation into the mains.
Switch the mains power on.
UK users: Replace the mains plug fuse. See
section 7.2.3, for more details.
Replace the mains fuses. See section 7.2.6, for
more details.
The LED indicators are
not illuminating
24V power supply fuse
has blown
Contact your local distributor
Devices plugged into
the internal socket are
not powering up
The power switch on
the device is not
switched on
The plug for the device
is not fully inserted
into the socket
The fuse in the device
has blown and/ or the
device has failed
The internal socket
fuse has blown
Turn the power switch on the device on
Check that the plug is correctly inserted into the
socket
Plug another device into the internal socket to
check the operation of the internal socket. If the
fuse has failed in the device, the additional
device should operate when plugged into the
internal socket.
Contact your local distributor
