9-80
CL 5
Appendix
Resetting the Operating Software
This section contains supplementary information
including instructions on:
• Resetting the Instrument’s Operating Software
• Upgrading the Instrument’s Software
• EMC Documentation
• Manufacturing and Service Center Locations
9.1 Resetting the Operating
Software
WARNING:
The following procedure deletes all
Custom Setup files stored in the instrument. Any files
you wish to retain should be downloaded using the
UltraMATE PC software before resetting the operating
software. Data recorder files (if so equipped) stored
on the installed SD card will not be deleted.
To reset the instrument’s operating software:
Step 1:
Turn off the instrument.
Step 2:
Press and hold down
then press
and hold down
. Continue to press both keys for
approximately three (3) seconds until the power-on
sequence is initiated.
Step 3:
A successful reset is acknowledged when the
RESET COMPLETE message briefly appears in the dis-
play screen’s bottom center.
9.2 Upgrading the Operating
Software
The CL 5 operating software can be upgraded using
an internet connection and an upgrade utility pro-
gram. Each instrument is shipped with a USB stick
containing the CL 5 Upgrade Utility Program.
Step 1:
Install the Upgrade Utility Program on your
Internet connected PC.
Step 2:
Run the program by clicking on the program
icon, located on your Program Menu. (Click the START
and then RUN buttons, select PROGRAMS, and select
CL 5 Upgrade Utility.)
Step 3:
Select the Download New File button.
Содержание Waygate Technologies CL 5
