4
4.0 Unpacking the PT900 system
Before removing the PT900 system from its carrying case (see the optional
hard shell carrying case in Figure 1 on page 5), inspect the contents of the
case carefully. Before discarding any of the packing materials, account for
all components and documentation listed on the packing slip. If anything is
missing or damaged, contact Panametrics Customer Care immediately for
assistance.
Because the PT900 system may be ordered in many different configurations,
the following packing list is shown only as a typical example:
1. Transducers (2)
2. Clamping Fixture
3. Transducer Cables
4. Transmitter
5. Tablet
6. Tablet Power Cord
7. SD Card
8. Case
9. PT900 Power Supply
10. OD Tape
11. Couplant
12. PT900 Mounting Strap w/Magnet
13. Temperature Transmitter
14. Thickness Gauge
15. Documentation
In addition to the standard components, the following optional components
are available for use with the PT900 system:
• Energy kit with an RTD module and an RTD cable for connection to the
PT900 transmitter
• An AIO cable with cabling box
• A DIO cable with cabling box
• A battery charger
• A transducer extension cable up to 100 ft long
• A 48” chain for the clamp-on fixture