Baker Hughes PT9-AIO Скачать руководство пользователя страница 28

Страница: 28 / 30

12.1 Power LED

•  Solid Green light when the meter is powered On
•  No light when the meter is Off
•  Blinking Green light when the meter is in power save mode

12.2 Bluetooth LED

• Solid Blue light when Bluetooth®is linked to a transmitter
• Blinking Blue light when Bluetooth® is in the click-button to confirm pairing

process

• Solid Red light when the meter is on and Bluetooth® is idle or is not linked

to a transmitter

• No light when Bluetooth® is in configuration mode

12.3 Status LED

•  Solid Green light when the meter is in measure mode without any errors
•  Red light when an error occurs while the meter is in measure mode
•  No light when the meter is in configure mode

12.4 Battery LED

• Solid Green light when the battery is fully charged (>99%), but the AC

adapter is connected

• Solid Green light when the battery level is high (>20%), but the AC adapter

is not connected

• Blinking Green light when the battery is not fully charged, but it is charging

with the AC adapter connected

• Red light when the battery level is low (≤20%) and the battery needs to be

charged immediately

• Blinking Red light when the battery level is low (≤10%) and the meter will be

out of power soon

• Light off when the meter is On, but the battery is completely discharged

and the AC adapter is connected

Содержание PT9-AIO































Результаты поиска

Содержание PT9-AIO

Отзывы:

Похожие инструкции для PT9-AIO

Бренды по названию

Популярные бренды

Baker Hughes PT9-AIO, Быстрый старт

Результаты поиска

Содержание PT9-AIO

Отзывы:

Похожие инструкции для PT9-AIO

Бренды по названию

Популярные бренды