Baker Hughes Panametrics PanaFlow Z3 Скачать руководство пользователя страница 11

Страница: 11 / 118

PanaFlow Z3 User’s Manual

Preface

Environmental Compliance

RoHS

The PanaFlow Z3 fully complies with RoHS regulations (Directive 2002/95/EC).

Waste Electrical and Electronic Equipment (WEEE) Directive

BakerHughes is an active participant in Europe’s

Waste Electrical and Electronic Equipment

(WEEE) take-back

initiative (Directive 2012/19/EU).

The equipment has required the extraction and use of natural resources for its production. It may contain hazardous

substances that could impact health and the environment.

In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the

natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle

most of the materials of your end life equipment in a sound way.

The crossed-out wheeled bin symbol invites you to use those systems.

If you need more information on the collection, reuse and recycling systems, please contact your local or regional

waste administration.

Please visit www.bakerhughesds.com/health-safety-and-environment-hse for take-back instructions and more

information about this initiative.

Содержание Panametrics PanaFlow Z3























































































































Результаты поиска

Содержание Panametrics PanaFlow Z3

Отзывы:

Baker Hughes Panametrics PanaFlow Z3, Руководство пользователя, Страница: 11 / 118

Результаты поиска

Содержание Panametrics PanaFlow Z3

Отзывы: