Baker Hughes Masoneilan 12400 Series, Инструкция по эксплуатации и руководство по безопасности

Страница: 56 / 81

54 | BHGE ® 2017 Baker Hughes, a GE company. All rights reserved.
10. Troubleshooting
10.1. NO SIGNAL

Check connection wires to 12400 Series instrument.

Check polarities of the connection wires.
10.2. EXISTING SIGNAL BUT NOTHING ON LCD DISPLAY

The electronic module might be damaged and must be replaced at factory.
10.3. STEADY SIGNAL, NO CHANGE WHEN LEVEL VARIES

In case of external mounting (see Section 4.2.1), check that displacer lock up in the displacer chamber, made for
transportation purpose, has been removed.

Check the instrument is not in FAILSAFE mode.

Check the device is in NORMAL operating mode (alternating display of signal and level variable).

Check correct coupling between transmission rod and mechanism sub-assembly by moving flexure (59), which allows
simulating a level change.

Check that the correct supply voltage is applied to terminal blocks of main analog output connections (AO_1).
10.4. OUTPUT SIGNAL DIFFERS FROM VALUE DISPLAYED ON LCD

Check the load resistance is compliant with Section 5.4.5 and the power supply applied to main analog output signal is
greater than 10 VDC.

Insert a reference milliamp meter in series with the 4-20 mA signal loop.

To recalibrate the internal milliamp meter, enter the [VAR SET] sub-menu via the ADVANCED SETUP menu (see Appendix
C).
o
Enter into [MA LOW:mA]. Decrease or increase value (ranges from 2900 to 3500 by increment one) until the reference
milliamp meter indicates 4.000mA (see Appendix C).
o
Enter into [MA HI:mA]. Decrease or increase value (ranges from 2900 to 3500 by increment one) until the reference
milliamp meter indicates 20.000mA (see Appendix C).
o
Enter into [SIG GENE] via the ADVANCED SETUP menu to generate various output signals and check the current signal
versus the reference milliamp meter (see Appendix E).
WARNING:
FULL COMPLIANCE WITH STANDARDS REQUIREMENTS RELATED TO INTRUMENTS INSTALLED
IN HAZARDOUS AREAS MUST BE ENSURED.