Baker Hughes Druck Dry PTC 200, Инструкция по эксплуатации

Страница: 46 / 64

Copyright 2022 Baker Hughes Company.
36 | PTC Temperature Calibrators–English
8.2 Starting the Testing
1. Slide the start/stop slider completely to the right. The slider text changes from “start” to
“stop”.
Figure 31: Start/Stop Slider - Starting the Test Task
2. The test task is started.
Figure 32: Example Test Task
3. The status of the test task is displayed on the display range window. See Section 5.2.
4. On successful test task completion, the following message is displayed.
Figure 33: Test Task Completed Successfully Message
8.3 Canceling the Testing
1. Slide the start / stop slider completely to the left. The slider text changes from “stop” to
“start”.
Figure 34: Start/Stop Slider - Stopping the Test Task
2. The test task is aborted.
3. The calibrator goes to the “Test End” temperature defined by the test task. See “Behavior at
Test End” on page 32.
Note: Do not leave the calibrator unattended at high temperatures. See Section 4.4.2.
4. Wait until the calibrator has cooled down sufficiently.
INFORMATION
During testing, all user controls except the Start/Stop slider
and the Alarm Signal are disabled.