Baker Hughes Druck Dry PTC 200, Инструкция по эксплуатации

Страница: 39 / 64

Copyright 2022 Baker Hughes Company.
English–PTC Temperature Calibrators | 29
Stability Range
The stability range defines the maximum deviation from the set point which the calibrator should
detect as stable. The smallest permitted value is 0.001.
6.2.4 Device Under Test (DUT)
1. In the “Configure Test Task” window, see Figure 20, tap the “DUT” icon.
6.2.4.1 Link DUT to Test Channel
Figure 23: Link DUT to Test Channel Window
1. Tap the desired test channel.
2. Tap the
icon.
3. Select a DUT and confirm the selection.
6.2.4.2 Unlink the DUT from the Test Channel
1. Tap the desired test channel.
2. Tap the
icon.
6.2.4.3 Configure the DUT
1. Tap the desired test channel.
2. Tap the
icon.
3. Tap the icon.
Note: Protected DUT cannot be edited. Make a copy of the DUT first.
4. Tap the icon.
5. Configure the DUT with the required parameters.
Switch Test
If you have selected automatic data acquisition (Switch Test) and switch as DUT type, you must
set the type of the switch contact:
1. Tap “Switch Type Selector”.
2. Select the type of contact type of the switch:
a. NO (Normally Open), or
b. NC (Normally Closed)