Baker Hughes Druck Dry PTC 200, Инструкция по эксплуатации

Страница: 45 / 64

Copyright 2022 Baker Hughes Company.
English–PTC Temperature Calibrators | 35
The following configuration options for dialog boxes, the configuration toolbar and access level
are availble.
Dialogbox DELETE
Configure whether a warning message is displayed before an item is deleted.
Dialogbox BACKUP
Configuration Toolbar
Configures which entries are displayed in the configuration bar on the main screen. The order in
which entries are displayed in the configuration bar can also be configured.
Access Level
Select an access level:
8. Testing Process / Calibration
8.1 Before Starting
Before starting the testing process, check that:
1. The calibrator has a suitable installation site and operational position. See Section
4.1.
2. The electrical connections have been made correctly. See Section 4.2.
3. The correct insert has been selected for the testing. See Section 4.3.
4. The insert is clean and dry.
Note: Ice and condensation can be removed from the insert by gently heating above 100 °C
(212 °F).
5. The DUT is held securely in the calibrator.
6. The calibrator has sufficient structural stability.
Setting Description
Note Settings Configure whether to prompt for a system backup when the calibrator starts.
Backup Interval Prompt for a system backup after a specified number of completed test tasks
has elapsed.
Access Level Description
Standard Test task parameters cannot be changed.
Advanced (Default)
Test task parameters can be changed after tapping the icon.
Expert Test task parameters can be changed without prior confirmation.
HOT SURFACE
The calibrator may become very hot when in operation.
Touching hot parts can result in serious injuries.
Never touch the dry block, micro bath, inserts or the DUT at temperatures above
35 °C (95 °F) or below 10 °C (50 °F).
Allow the calibrator to cool before you remove the DUT, change the insert or
switch off the calibrator.
INFORMATION
For optimum performance, allow the calibrator to warm up
for at least an hour before use.