Baker Hughes Druck 8000 Series, Инструкция по эксплуатации

Страница: 3 / 44

Copyright 2010 Baker Hughes Company.
English–TERPS Instruction Manual | i
Safety
The manufacturer has designed this sensor to be safe when operated using the procedures
detailed in this manual. Do not use this sensor for any other purpose than that stated.
This publication contains operating and safety instructions that must be followed for safe
operation and to maintain the sensor in a safe condition. The safety instructions are either
warnings or cautions issued to protect the user and the equipment from injury or damage.
Use qualified
1
personnel and good engineering practice for all procedures in this publication.
Toxic Materials
There are no known toxic materials used in this sensor.
Maintenance
The sensor must be maintained using the manufacturer’s procedures and these should be carried
out by authorized service agents or the manufacturer’s service departments.
Druck.com
For technical advice contact the manufacturer.
Symbols
Abbreviations
The following abbreviations are used in this manual.
WARNING
Do not apply pressure greater than the maximum safe working
pressure to the sensor.
1 A qualified technician must have the necessary technical knowledge, documentation, special test
equipment and tools to carry out the required work on this equipment.
Symbol Description
This equipment meets the requirements of all relevant European safety directives. The
equipment carries the CE mark.
This symbol, in this manual, indicates a hazardous operation.
Do not dispose of this product as household waste. Use an approved organization that
collects and/or recycles waste electrical and electronic equipment. For more information,
contact one of these:
- Our customer service department: Druck.com
- Your local government office.