Baker Hughes 022-508-909, Руководство по эксплуатации

Страница: 37 / 89

CL 5 4-37
Measuring Thickness
Selecting the Displayed View
After setting up the instrument, as described in
Chapter 3, additional adjustments can be made to
select the type of measurement made and the way
in which it is displayed. In this chapter, you’ll also find
information related to configuring and working with
the optional A-Scan display including how to:
• Select the measured value to view (Section 4.1)
• Work with Normal measurement mode (Section
4.2)
• Use the Min Scan and Max Scan measurement
modes (Section 4.3)
• Interpret the Differential/Rate-of-Reduction
measurement mode (Section 4.4)
• Measure and Evaluate multiple thickness points
on the same workpiece and capture this data
with Quality View Mode and Data Recorder Option
(Section 4.5)
• Work with the optional Thi A-Scan
measurement mode (Section 4.6)
• Use the optional Velocity measurement mode
(Section 4.7)

Note:
Load a Setup file corresponding to the connected
probe prior to making the adjustments described in
this chapter. Loading a Setup file after these adjust-
ments are made will force certain settings back to
the default value stored in the file.

Note:
After making some or all of the adjustments described
in this chapter, the modified instrument setup can
be stored by creating a Custom Setup file. Your
instrument will store up to 5 Custom Setup files, which
are created (and erased) via the setup display. See
Section 3.5 for step-by-step instructions to create a
Custom Setup file.
4.1 Selecting the Displayed View
The measurement displayed by the instrument is
modified by
Step 1: Press multiple times to access the configu-
ration menu