Bake Max BMCB001, Руководство по эксплуатации

Страница: 9 / 18

Replacing Fan Motor
Step 1. DISCONNECT POWER SOURCE.
Step 2. After unit has cooled, remove the crumb tray, and turn unit over so this bottom is
facing upward. Never place unit on its side.
Step 3. Unplug power supply cord from fan motor.
Step 4 . Remove screws which hold fan motor and grill to the control box cover and
remove fan.
Step 5. Once removed, clean fan grill and control box cover using warm soapy water.
Step 6. Put replacement motor and grill in place and secure to control box cover with
screws previously removed.
Step 7. Reconnect power supply cord to fan motor.
Step 8. Replace back panel and enclosure.
Step 9. Connect unit to power source, reinstall the crumb tray and test unit for proper
operation.
Replacing Belt Drive Motor:
Step 1. DISCONNECT POWER SOURCE.
Step
2 . After unit has cooled, remove the crumb tray and turn unit over so the bottom is
facing upward. Never place unit on its side.
Step 3 . Remove the control box cover which contains the fan motor.
Step 4 . Remove the cover that will expose the drive chain and sprockets.
Step 5 . Remove the sprockets from motor shaft, using an Allen wrench and loosening the
set-screw.
Step 6. Remove the wire from terminal block connecting the drive motor to the internal
wiring.
Step 7 . Remove screws holding motor in place and remove motor from unit.