Bake Max BMCB001, Руководство по эксплуатации

Страница: 7 / 18

Monthly Cleaning & Removal of Belt:
1. Turn main power switch to the OFF position. Disconnect unit from its power source and
allow unit to fully cool.
2. Perform daily and weekly cleaning procedures. Follow the step 1 in Fig
ure “B”, to
remove all of the master links. To remove, unhook each end of one link and bring the two
ends together, and un-thread. Once detached, re-hook onto itself so not to get damaged.
3. Now that the links have been unhooked, the conveyor can now be carefully removed
from the oven. Standing at one end of the oven, starting with the end on the bottom, roll
the conveyor belt until it has been totally removed. Take careful notice being sure not to
damage the heater tubes, and working it over the drive sprockets, (see Figure
“C” Below).
4. Clean conveyor belt in deep sink, caustic cleaners may be used. For a heavy soiled
conveyor belt, soak overnight in hot soapy water.
Warning: Do not attempt to clean the heater tubes.
5. Take this opportunity to clean and remove any loose materials inside the unit. Using a
mild cleaner and damp cloth, carefully wipe the inside surfaces being sure NOT to clean
the heater tubes.
WARNING: DAMAGE CAN OCCUR TO THE HEATER TUBES FROM
IMPROPER CLEANING. DO NOT SPRAY CLEANING SOLUTIONS INTO OVEN
CAVITY.
6. Reinstall conveyor belt by first laying the belt along the bottom of the oven cavity
making sure the hooks on the sides are facing the inside and ends of the hooks will be
pointing away from the direction of the belt so not to catch on any internal components
once put back into operating. Also, being sure to properly align the belt over the conveyor
drive sprockets shown in Fi
gure “C” Above. PLEASE NOTE: The direction of the belt.