Bake Max BMCB001, Руководство по эксплуатации

Страница: 10 / 18

Step 8 . Put new motor in place and attach loosely with mounting screws.
Step 9. Replace sprocket on motor shaft. PEASE NOTE: The two sprockets must line up
flush with each other, so the chain does not twist any during operating. Also the hub gets
installed closest to the motor.
Step
10.
Slide motor unit the drive chain has about 1/4” slack when lightly pushed at the
center of its top open run. (See chain tensioning illustration below.)
Step
11 . Tighten screw to secure motor.
Step 12 . Rewire leads.
Step 13. At this time you may plug unit in and test for proper operation prior to reinstalling
panel and turning unit back over onto its feet.
Step 14 . If unit is working correctly, turn unit off and unplug unit completed.
Step 15 . Reinstall side panels and control box cover. Place unit back into its upright
position. Reinstall the crumb tray.
Step 16. Connect unit to power source and test unit for proper operation.