Baja motorsports BV250 Скачать руководство пользователя страница 8

Страница: 8 / 67

Safety Information

MAKE YOURSELF VISIBLE

Make yourself more visible by wearing bright reflective clothing. Use

your horn when it will helps others see you and before

turning use your turn signal.

RIDE WITHIN YOUR LIMITS

You should not ride beyond your abilities and never faster than the

posted speed limit. NEVER OPERATE THIS VEHICLE WHILE UNDER

THE INFLUENCE OF ALCOHOL, DRUGS, OR

MEDICATION OF ANY KIND. SUCH OPERATION COULD BE

DANGEROUS TO YOURSELF AND/OR OTHERS.

KEEP YOUR VEHICLE IN A SAFE CONDITION

Proper maintenance will ensure a safe ride. Perform all

recommended maintenance and inspect your vehicle before each

ride. Never modify your vehicle in any way to make it unsafe.

NHTSA Safety Notice

If you believe that your vehicle has a defect which could cause

serious injury or death, you should immediately contact the National

Highway Traffic Safety Administration (NHTSA) in addition to

notifying Baja Motorsports.

If NHTSA receives similar complaints, it may open an investigation

and if it finds that a safety defect exists in a group of vehicles, it may

order a recall and remedy campaign.

However, NHTSA cannot become involved in any individual problems

between you, your dealer or Baja Motorsports.

To contact NHTSA you may call the Auto Safety Hot line toll-free

within the United States on 1-800-424-9393 or write to: NHTSA, 400

Seventh Street SW, Washington, DC 20590.

Содержание BV250




































































Результаты поиска

Содержание BV250

Отзывы:

Похожие инструкции для BV250

Бренды по названию

Популярные бренды

Baja motorsports BV250, Руководство пользователя

Результаты поиска

Содержание BV250

Отзывы:

Похожие инструкции для BV250

Бренды по названию

Популярные бренды