Baja motorsports BV250 Скачать руководство пользователя страница 66

Страница: 66 / 67

Emission Control System Warranty

LIMITED LIABILITY

The liability of the Distributor under this Emission Control System Warranty is limited solely

to the remedying of defects in material workmanship by an authorized dealer at its place of

business during customary business hours. This warranty does not cover inconvenience or

loss of use of the vehicle or transportation of the vehicle to/from the authorized dealer. The

Distributor is not liable to any person for incidental, consequential or special damages of

any description, whether arising out of express or implied warranty or any other contract,

negligence or other tort or otherwise.

No express emission control system warranty is given by the Distributor except as

specifically set forth herein. Any emission control system warranty implied by law,

including any warranty of merchantability or fitness for a particular purpose is limited to

the express emission control system warranty terms stated in this warranty. The foregoing

statements of warranty are exclusive and in lieu of all other remedies. All express

warranties not stated in this warranty are disclaimed. Some states do not allow limitations

on how long an implied warranty lasts, so the above limitations may not apply if it is

inconsistent with the controlling state law.

No dealer is authorized to modify this Emission Control System Warranty. If you have any

questions regarding your warranty rights and responsibilities, you should contact BAJA

MOTORSPORTS or the California Air Resources Board, 9528 Telstar Avenue, El Monte, CA

91731 (for California registered vehicles only).

Содержание BV250




































































Результаты поиска

Содержание BV250

Отзывы:

Похожие инструкции для BV250

Бренды по названию

Популярные бренды

Baja motorsports BV250, Руководство пользователя

Результаты поиска

Содержание BV250

Отзывы:

Похожие инструкции для BV250

Бренды по названию

Популярные бренды