INSTALLATION
INNIS01 NETWORK INTERFACE SLAVE MODULE CONFIGURATION
WBPEEUI250016A1
3 - 5
for I/O expander bus address settings. Poles four through
eight set the address of the on-board event and error counters
that the NIS module displays using the group A and B face-
plate LEDs. LED B8 is the most significant bit. LED A1 is the
least significant bit. Table
lists the possible event counter
addresses. Table
lists the possible error counter addresses.
Record the dipswitch SW4 settings in the space provided.
Example of Counter Usage
A counter setting with the hexadecimal value of 09 keeps track of the number
of multicast messages received excluding those originated. To display this
counter on the front panel LEDs, set dipswitch SW4 as follows: position 4 = 0,
5 = 1, 6 = 0, 7 = 0, and 8 = 1.
Table 3-4. INNIS01 I/O
Expander Bus Address Settings
Address
Example
Dipswitch Pole
(Binary Value)
1
(4)
2
(2)
3
(1)
0
0
0
0
3
0
1
1
7
1
1
1
NOTE: 1 = OPEN or OFF, 0 = CLOSED or ON.
Table 3-5. INNIS01 Module Event Counters
Dipswitch Pole
1
(Binary Value)
Hexadecimal
Value
Description
2
4
(16)
5
(8)
6
(4)
7
(2)
8
(1)
0
0
0
0
0
00
Number of timer interrupts.
0
1
0
0
1
09
Number of multicast messages received (excluding
originated messages).
0
1
0
1
0
0A
Number of multicast destinations received.
0
1
0
1
1
0B
Number of time sync messages received (excluding
originated messages).
0
1
1
0
0
0C
Number of broadcast messages received (excluding
originated messages).
0
1
1
0
1
0D
Number of NIS poll messages received (excluding
originated messages).
0
1
1
1
0
0E
Number of poll messages acknowledged by this node.
0
1
1
1
1
0F
Number of poll messages busy negative acknowledged by
this node.
1
0
0
0
0
10
Number of messages transmitted (total loop traffic).
1
0
0
0
1
11
Number of loop messages received and forwarded by this
node.
1
0
0
1
0
12
Number of messages originated by this node (including
retries).
1
0
0
1
1
13
Number of message retries originated by this node.
