INTRODUCTION
I-E96-215A
3 - 1
SECTION 3 - INSTALLATION
INTRODUCTION
This section explains what must be done before placing the
Quick Response Controller (IMQRC01) into operation. Read,
understand and do the steps in the order they appear before
operating the QRC.
SPECIAL HANDLING
NOTE: Always use Bailey's Field Static Kit (P/N 1948385A1 - con-
sists of wrist strap, ground cord assembly, alligator clip, static dissi-
pative work surface) when working with modules. The kit is
designed to connect a technician and the static dissipative work sur-
face to the same ground point to prevent damage to the modules by
electrostatic discharge.
The QRC uses electrostatic sensitive devices. Follow Steps 1
through 4 when handling:
1. Keep the module in its special antistatic bag until actual
installation takes place. Save the bag for future use.
2. Ground the antistatic bag before opening.
3. Verify that all devices connected to the module are properly
grounded before using them.
4. Avoid touching the circuitry when handling the module.
UNPACKING AND INSPECTION
1. Examine the hardware immediately to verify it has not been
damaged in transit.
2. Notify the nearest Bailey Controls sales office of any such
damage.
3. ile a claim for any damage with the transportation company
that handled the shipment.
4. Use the original packing material and container to store the
hardware.
5. Store the hardware in an environment of good air quality,
free from temperature and moisture extremes.
