INTRODUCTION
I-E96-117B
B - 1
APPENDIX B - NICS01 CONTROLLER/STATION
TERMINATION MODULE
INTRODUCTION
The IISAC01 Analog Control Station can use the NICS01 Con-
troller/Station Termination Module for termination. All
dipswitch settings on the controller/station termination mod-
ule (ICS) relate to the IMCIS02 Control I/O Slave Module. Refer
to the
IMCIS02 Control I/O Slave Module
product instruction
for more information.
No analog inputs are routed to the station when using the ICS
termination module. For bypass and analog input capability,
the NIDS01 Station Termination Module and the ICS termina-
tion module are required.
NOTE: Terminating one or two stations with bypass, or intercon-
necting stations using the ICS module requires that you install the
NIDS01 termination module. There are no dipswitch settings on the
NIDS01 termination module.
Figure B-1. NICS01 Terminal Assignments
C
O
MMO
N
+2
4
V
D
C
1
1
1
1
1
2
3
4
2
2
2
2
3
3
3
4
4
5
6
7
8
9 10
11 12 13 14
15 16 17 18 19 20
21
23 24 25 26 27 28 29 30
22
ANALOG INPUT
ANALOG
OUTPUT
DIGITAL INPUT
SERIAL
LINK
DIGITAL OUTPUT
TP27165A
TERMINAL NUMBER
