Bailey IMCIS02, Инструкция

Страница: 12 / 58

INTRODUCTION
INSTRUCTION CONTENT
WBPEEUI240755B0 1 - 3
is selectable; jumpers select current or voltage mode for each
analog output depending on the process requirements.
The two front panel LEDs provide a visual indication of the
module status to aid in system test and diagnostics. The I/O
module can be removed or installed without powering the sys-
tem down.
INSTRUCTION CONTENT
This instruction is divided into eight sections and three appen-
dices. Read this instruction before installing or operating the
IMCIS12 or IMQRS12 module. A summary of section content
follows:
Introduction Contains a brief description, general usage information and
technical specifications.
Description and
Operation
Uses block diagrams and schematics to explain module opera-
tion and input circuitry.
Installation Covers the preliminary steps to install the module and prepare
for operation. It covers address switch settings, mounting, wir-
ing connections, cabling and preoperational checks.
Operating Procedures Provides information on front panel indicators and start-up
procedures.
Troubleshooting Explains the meaning of error indications and contains trou-
bleshooting procedures.
Maintenance Contains scheduled maintenance tasks and procedures.
Repair and Replacement
Procedures
Contains procedures that explain how to replace the module.
Support Services Explains the services and training that Elsag Bailey makes
available to their customers.
Appendices Appendix A provides configuration information for the NTCS04
termination unit. Appendix B provides configuration informa-
tion for the NICS01 termination module. Appendix C provides
a quick reference for switch and jumper locations and settings.
HOW TO USE THIS MANUAL
Read this instruction before handling the IMCIS12 or IMQRS12
module. Refer to a specific section for information as needed.
1. Read the operating procedures section before installing the
module.
2. Do the steps in the installation section.