17
17
Dust Hose Connections
This machine is equipped with a dust collection port.
Note: A dust collector and ducting is optional and not included with the table.
The minimum required air speed at the end of flexible tube is 20 m/sec. The minimum required
air volume of the machine is 750 m³/hr. (43,000~49,000 cu. ft./hr.). Use antistatic and electrically
conductive hoses only.
IMPORTANT: Use care and planning when attaching and routing flexible hose for
dust collection. DO NOT create an entanglement hazard or a trip hazard or an interference of
the work station when routing the hose(s).
The 4” (100mm) dust port is part of and on the top of the router head.
When connecting the flexible hose, plan for:
•
The hose to travel with the router head when the machine is in operation.
•
Positioning so as NOT to interfere with the
operator or the work piece.
•
Prevention of the hose from creating a trip or
entanglement hazard.
•
Having the hose secured to the port to prevent
accidental detachment during operation.
1. Using the six cap screws installed in the top of the
X, Z motor cover, install the dust hose adaptor
support (A) to the top of the motor cover.
2. Connect the adaptor hose onto the dust brush and
the adaptor support and secure in place using a
hose clamp on each end.
A
