28
28
Single-key Function
Single-key function table
Key icon
Key name
Function
O
Increase of feed rate override (This will increase the feed
rate at 10% increments to a maximum of 120% of the set
feed rate.); Input of number 7; Increase of spindle speed
with the help of auxiliary key when spindle port has input.
Y+
Positive shift of Y axis; input of number 8; switch between
MCS and WCS with the help of auxiliary key.
Z+
Positive shift of Z axis; input of number 9.
X-
Negative shift of X axis; input of number 4; returning to
mechanical origin (Home) with the help of auxiliary key.
Spindle start/stop
Start or stop of spindle under manual mode; input of
number 5; back to workpiece origin with the help of
auxiliary key.
X+
Positive shift of X axis; input of number 6.
Override-
Decrease of feed rate override (This will decrease the feed
rate at 10% increments to zero [travel stopped].); Input of
number 1; Decrease of spindle speed with the help of
auxiliary key when spindle port has input.
Y-
Negative shift of Y axis; input of number 2.
Z-
Negative shift of Z axis; input of number 3.
Speed switchover
Switch between manual high/low speed; input of number 0;
Tool touch-off setting with the help of auxiliary key.
Setting origin
Sets (zeros) the workpiece origin of X and Y axes; Input of
minus; Sets (zeros) the origin of Z axis with the help of
auxiliary key.
Menu
Entering menu page; input of decimal point; entering image
update page at the time of system start-up.
Start
Start key; breakpoint resuming with the help of auxiliary
key.
Up
Suspend (pause) processing; Up direction key. Moves the
cursor up in the various menus.
ESC
Stop processing; cancellation of various selections, inputs
and operations.
