Baileigh STS-16120CNC, Руководство оператора

Страница: 49 / 56

47
47
NO. TROUBLE ACTION
17 Rip fence did not move after START
Check if the encoder wiring is correct and the
motor runs normally.
18
Rip fence did not move to the target
position
Act as No. 14.
19 PLC-ERROR
1. Start the machine again to see if the trouble
can be solved.
2. Enter the machine's data page to search
PLC's error number and advise the factory.
20
The scoring saw cannot move up and
down
Check if motor and wiring are normal.
21
Scoring saw blade cannot move back
and forward
Check if motor and wiring are normal.
22
Scoring saw blade rise protective
switch ON Check if the moving position exceeds the
moving range of the scoring saw blade.
23
Scoring saw blade down protective
switch ON
Act as No. 22.
24 Error set up of the saw diameter
Input the correct diameter of the proper saw
for machine.