Baileigh STS-16120CNC, Руководство оператора

Страница: 17 / 56

15
15
Operation of Position Correction
The function is for setting the present value of
each shaft’s position.
Ex: If the main saw blade shown on the page is 5
degree but actual angle is 0 degree, the
operating way as follows:
Step 1: Push key on home page.
Push key to enter position correction
page.
Push key to change value of angle of
main saw blade.
Step 2: Input actual angle, 0 degree and then
push key to finish input.
Step 3: Push key to save. The setting is
completed.
Note: The correction way of main
saw blade UP/DOWN and rip fence is the same
above mentioned way.