Baileigh SS-3528, Руководство оператора

Страница: 28 / 52

25
25
STRAIGHTLINE BEVEL EDGE SHAPING
To perform a bevel edge cut, the infeed edge of the jig is
placed against the infeed fence and clamped to the table,
as shown in Figure 18.
The outfeed fence is moved forward as necessary to
compensate for the cut.
CONTOUR EDGE SHAPING WITH COLLAR BEARING
To shape contoured edges, the operator must first remove
the fence assembly.
In order to control the workpiece and limit the depth-of-cut,
the operator must use an anti-friction collar with the cutter
(s) as shown in Figure 19.
The collar may be positioned above or below the cutter (s),
and its function is to ride against the workpiece or template.
At the same time, the collar will establish the depth-of-cut as
shown in Figure 20. Whenever possible, always use the ring
guard.