18
18
Improper connection of the equipment-grounding conductor can result in risk of electric
shock. The conductor with insulation having an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric
cord or plug is necessary, do not connect the equipment-grounding conductor to a live
terminal.
Check with a qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the tool is properly grounded.
Repair or replace damaged or worn cord immediately.
Power cord connection:
1. Turn the main disconnect switch on the control
panel to the OFF position.
2. Route a power cord into the junction box at the
lower corner of the machine.
3. Connect the two power wires terminals T & R.
Connect the ground wire (typically green) to the
ground terminal.
4. Route the cord away from the machine toward the
power supply.
a. Route the power cord so that it will NOT
become entangled in the machine in any
way.
b. Route the cord to the power supply is a way that does NOT create a trip hazard.
5. Connect the power cord to the power supply and check that the power cord has not been
damaged during installation.
6. When the machine is clear of any obstruction. The main power switch may be turn ON to test
the operation. Turn the switch OFF when the machine is not in operation.
Содержание SS-3528
