7
7
SAFETY PRECAUTIONS (cont.)
10. Cutting Depth. NEVER attempt to remove too much material in one pass. Making several
light cuts produces a cleaner finish and helps to prevent kickback.
11. Dress appropriate.
DO NOT
wear loose fitting clothing or jewelry as they can be caught in
moving machine parts. Protective clothing and steel toe shoes are recommended when
using machinery. Wear a restrictive hair covering to contain long hair.
12. Blind Cutting. By keeping the cutter on the underside of the piece part you can reduce the
risk of accidental contact with the cutter.
13. Use eye and ear protection. Always wear ISO approved impact safety goggles
14.
DO NOT
overreach. Maintain proper footing and balance at all times.
DO NOT
reach over or
across a running machine.
15. Cutter Height. Keep any unused part of the cutter below the surface of the table so the
cutter does not grab the piece part and inflict operator injury.
16. Stay alert. Watch what you are doing and use common sense.
DO NOT
operate any tool or
machine when you are tired.
17. Observe work area conditions.
DO NOT
use machines or power tools in damp or wet
locations.
DO NOT
expose to rain. Keep work area well lighted.
DO NOT
use electrically
powered tools in the presence of flammable gases or liquids.
18.
DO NOT
bypass or defeat any safety interlock systems.
19. Know the location of the ON -
OFF switch and the “E”- STOP button.
20. Keep visitors a safe distance from the work area.
21. Keep children away. Children must never be allowed in the work area.
DO NOT
let them
handle machines, tools, or extension cords.
22.
DO NOT
operate machine if under the influence of alcohol or drugs. Read warning labels on
prescriptions. If there is any doubt,
DO NOT
operate the machine.
23.
DO NOT
touch live electrical components or parts.
24. Using Safety Guards. NEVER remove any guards or covers while machine is running. Use
an overhead guard whenever the fence is removed.
25. Cutter Hazard. NEVER place hands directly over or in front of the cutter. .ALWAYS keep
hands at least 6” (150mm) from the cutter while operating.
26.
Maintain machine in top condition
. Keep clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
Содержание RTS-3012
Страница 14: ...12 12 GETTING TO KNOW YOUR MACHINE ...
Страница 24: ...22 22 PARTS DIAGRAM ...
