Baileigh RTS-3012, Руководство оператора

Страница: 10 / 28

8
8
SAFETY PRECAUTIONS (cont.)
27.
Be Sure all equipment is properly installed and grounded according to national, state, and
local codes. If machine is equipped with a three-prong plug, it should be plugged into a
three-hole electrical receptacle. If an adapter is used to accommodate a two-prong
receptacle, the adapter plug must be attached to a known ground. Never remove the third
prong.
28. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
29. Reduce the risk of unintentional starting . Make sure switch is in
“OFF”
position before
plugging in power cord.
30. Make Sure the portable router has been installed securely before powering up.
31. Check that the router bit is locked securely to the router tool.
32. Never leave machine running unattended. TURN POWER OFF
. Don’t leave machine
until it comes to a complete stop.
33. Make sure machine is disconnected from power supply while motor is being mounted,
connected or reconnected.
34. Using correct materials. Jointing materials other than natural wood fiber can result in
serious personal injury and machine damage. NEVER use this machine for anything except
jointing in wood.
35. Warning : The dust generated by certain woods and wood products can be injurious to your
health. Always operate machinery in well ventilated areas and provide for proper dust
removal. Use wood dust collection systems whenever possible.