Baileigh Industrial SR-5016E, Руководство оператора

Страница: 17 / 40

15
15
A Machine Stand Supports machine components.
B Top Pivot Roll Pivots to allow removal of finished piece part.
C Safety Stop Bar Activates switch to stop drive motor.
D Lower Roll Adjustment Up-down motion to pinch material for rolling.
E Chain Guard Covers drive chain and gears.
F 1.5hp Motor W/Reducer Provides power to rolls.
G Electrical Enclosure Houses electrical components.
H Dual Foot Switch Controls forward and reverse motion of rolls.
I Stop Bar Micro Switch Shuts off power when actuated.
J Power Lamp Illuminates when the motor is running
K Run Lamp Illuminates when the rolls are turning
L Power On Switch Starts the motor
M Power Off Switch Stops the motor
N Emergency Stop Switch Stops the motor
O Idle Roll Scale Used to set the back roll parallel to the other rolls
P Idler Roll Adjustment Used to set diameter of piece part.
Q Chain Tension Slides Keeps adequate tension on drive chain.
R Wire Grooves For Forming round stock