Baileigh Industrial PT-105HD, Руководство оператора, Страница: 29 / 48

27
27
Thermal Dynamics
IMPORTANT: THIS IS FOR REFERENCE ONLY. This instruction is based upon
generally available information. Contact the manufacturer of your plasma cutter for specific set
up information.
Signal Sockets / Wire No. Wire Colors
Start / Stop (plasma arc) 3, 4 Red, Black
OK to Move (start machine motion) 12, 14 White, Green
Voltage Divider 5 (-), 6 (+) Yellow (-), Blue (+)
HyperTherm
IMPORTANT: THIS IS FOR REFERENCE ONLY. This instruction is based upon
generally available information. Contact the manufacturer of your plasma cutter for specific set
up information.
Signal Sockets / Wire No. Wire Colors
Start / Stop (plasma arc) 3, 4 Green, black
OK to Move (start machine motion) 12, 14 Red, black
Voltage Divider 5 (-), 6 (+) Black (-), white (+)
Miller
IMPORTANT: THIS IS FOR REFERENCE ONLY. This instruction is based upon
generally available information. Contact the manufacturer of your plasma cutter for specific set
up information.
Signal Wire Colors
Start (start plasma) Blue, Blue/White
Transfer (start machine motion) Orange, Orange/White
Voltage Divider Brown (+), Brown/White (-)
SOFTWARE
A license of BobCad/Cam Express is supplied with each table.
BobCad will provide the training and instructions for the operation of the software.
IMPORTANT: Download and use the
“Baileigh Plasma FangLing Post” post set
from the BobCad/Cam website for use with this controller.
http://partners.bobcad.com/?source=P_474463