30
30
Continuous Moving Function
When in the manual interface, press [F2] to enter the continuous-moving function interface. At
this moment, the system will move toward the specified direction if any directory key is pressed
and then released, and when the directory key or stop key is pressed the system will stop.
Fixed Length Moving
In the manual interface, press [F3] to enter the interface
of fixed length moving. The system prompts to input the
fixed length dimension in millimeters.
After inputting the fixed length, press ENTER.
Press and release any direction key, the system will
move the fixed length toward the direction selected.
During the process of moving, when any direction key
or stop key is pressed, the system will stop moving.
Breakpoint Recovery
To guarantee that the breakpoint could work correctly, you need to satisfy the following conditions:
1. When the system is paused, the system will automatically regard the paused point as the
current breakpoint and remember it.
2. When the system is in the process of cutting, the breakpoint signal is connected with the urgent
alarm input, when power is off, the system will regard the power-off point as the breakpoint
and remember it.
When you need to process after the breakpoint, after the system powers on, do not move the
torch.
Press [F7] in the main interface to enter the manual function interface, then press [F7] to recover
the breakpoint.
After recovering the breakpoint, if the torch has not been moved and is on the position when the
power was lost, press START, the system will process directly.
After the breakpoint is recovered, if the position is off
from the original one, move the torch to the original
point manually, or select it through choosing rows or
numbers.
The process will be: Press Stop to stop cutting. Move
the torch to the original point manually or choose the
nearest row through choosing the row selection (or
number selection). Press
[F9] “Start”, and then the
system will display the starting options.
