29
29
MANUAL FUNCTION
In the automatic interface, press [F7] (Manual) to enter the manual function interface.
The speed in the manual status is controlled by the manual moving parameters. During the
process of fixed moving function, you can adjust the speed by the acceleration or deceleration
key. In the manual interface, press the numeric key, the cutting speed changes to ratio which is
10 times of the corresponding figure of the speed limit you have set, for example press [3], change
the cutting speed to 30% of the speed limit you have set, press [8], and change the cutting speed
to 80% of the speed limit you have set.
Fixed Moving Function
When you enter into the manual interface, the default option is the continuous moving function.
Press [F1] to go for the fixed moving function. At this moment, the system will move toward the
specified direction if any directory key is pressed, and when the directory key is released, the
system will stop.
