Baileigh Industrial IDX-10, Руководство оператора

Страница: 28 / 40

26
26
19. Attach the magnetic band hub (J), with the
magnetic strip, to the gearbox, but do not
tighten yet. The thicker part of the hub should
face forward on the gearbox. (Fig. 12)
20. Attach the magnetic sensor (D) to the sensor
mount (L). Then attach the sensor mount to
the digital readout mount (C). (Fig. 11)
21. Attach the digital readout mount (C) to the gearbox using
the (2) 3/8-16 HHCS (E) and the (2) 3/8 lock washers from
the pointer mount.
22. With the readout mount and the sensor mount tight, adjust
the magnetic band hub so that the sensor is centered on
the magnetic band. Now the hub can be tightened onto
the gearbox. (Fig. 12)
23. Again, using the folded piece of paper, set the distance of
the sensor by placing the piece of paper between the
sensor and the magnetic strip. Tighten down the sensor
and remove the piece of paper. (Fig. 13)
(Fig. 11)
(Fig. 12)
(Fig. 13)