Baileigh Industrial ES-6100, Руководство оператора

Страница: 16 / 32

14
14
End Stop Fence
1. Install the end stop fence into the top of the belt
housing as shown.
2. Engage the roll pin into the predrilled hole and
secure in position with the hand knob.
Note: Be sure that the end stop fence
does not drag on the belt.
Motor/Dust Cover
1. Loosen the two hand knobs at the back of the belt
housing and the hand knob for the belt cover.
2. Slide the dust cover over the belt cover and under
the support bracket as well as under the washer
and up to bolt threads on the upper hand knob.
3. Hold the dust cover in position so that it does not
contact the belt or pulley and tighten the three hand
knobs.