Baileigh Industrial DP-2012F-HD-V3, Руководство оператора

Страница: 29 / 40

27
27
LUBRICATION AND MAINTENANCE
Daily Maintenance
•
Do a general cleaning by removing dust and chips from the machine.
•
Check and tighten any loose mounting bolts.
•
Sharpen or replace any worn or damaged tooling.
•
Lubricate the quill gearing.
•
Inspect the power plug and cord.
•
Keep area around machine clear of debris.
•
Check for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
Note: When cleaning chips and debris from the machine, use a brush and a shop
vacuum. DO NOT blow off the machine with compressed air. The force of the compressed air
may force chips into critical mechanisms or may inflict injury to yourself or others.
Weekly Maintenance
•
Lubricate threaded components and sliding devices.
•
Apply rust inhibitive lubricant to all non-painted surfaces.
•
Clean the machine and the area around it.
Note: The non-painted surfaces on the drill press should be protected against rust
and pitting. Wiping the machine clean after every use ensures that dust will not trap moisture
against bare metal surfaces.
Some woodworkers recommend using automotive paste wax on exposed steel and cast iron
surfaces. The wax provides a layer of protection, as well as reducing friction between lumber
and the table, making cuts faster and smoother. Avoid waxes that contain silicone or other
synthetic ingredients. These materials can find their way into lumber that is being worked, and
can make staining and finishing difficult. If you use paste wax, make sure that it is 100%
Carnauba wax.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.