Baileigh Industrial DP-2012F-HD-V3, Руководство оператора

Страница: 21 / 40

19
19
Arbor Removal
A drift key is included to aid in the drill chuck arbor
removal.
1. Extend the spindle downward until the slot is
exposed in the side of the quill.
2. Rotate the spindle until the inner slot is aligned with
the outer as shown. You will see through the spindle
when the slot is properly aligned.
3. Insert the drift key into the slot with the flat side up
and the tapered side down.
4. Allow the quill to rise until the flat side of the drift key
is against the quill stop.
5. Hold the drill chuck with one hand and tap on the
drift key with a mallet to release the arbor.