Baileigh Industrial DG-500, Руководство оператора

Страница: 11 / 28

9
9
6. After turning switch ON, always allow the disc to come up to full speed before sanding or
grinding.
7. Keep your hands clear of the disc.
8. Replace sanding discs when they become loaded and glazed or frayed.
9. Do not allow familiarity gained from frequent use of your sander/grinder to become
commonplace.
Always remember – a careless fraction of a second is sufficient to cause severe injury.
TECHNICAL SPECIFICATIONS
Disc Diameter 20” (508mm)
Disc Speed 1,100 rpm
Table Dimensions 25.5” x 14.5” (647mm x 368mm)
Table Adjustments Manual
Upward 30°
Downward 45°
Motor 2hp (1.5 kw) 220V / 1ph / 60hz / 6.6A
Power Requirements 220V / 1ph / 60hz
Shipping Dimensions (L x W x H) 30.5” x 28” x 54.5” (775mm x 711mm x 1384mm)
Shipping Weight 438lbs. (200kg.)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.