Baileigh Industrial DG-500, Руководство оператора

Страница: 10 / 28

8
8
19. Wear oil-free protective garments such as leather gloves, heavy shirt, high shoes or boots,
cuffless trousers, and a cap.
20. Watch for fire and keep a fire extinguisher close by.
21. DO NOT touch live electrical components or parts.
22. Turn off power before checking, cleaning, or replacing any parts.
23. Be sure all equipment is properly installed and grounded according to national, state, and
local codes.
24. Keep all cords dry, free from grease and oil, and protected from sparks and hot metal.
25. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
26. DO NOT bypass or defeat any safety interlock systems
ADDITIONAL HEALTH HAZARDS
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contain chemicals known to cause cancer, birth defects, and other reproductive harm. Some
examples of these chemicals are:
•
Lead from lead based paint.
•
Crystalline silica from bricks, cement, and other masonry products.
•
Arsenic and chromium from chemically treated lumber.
Specific Safety Precautions
1. Support piece part and maintain control of the part at all times.
2. DO NOT wet grind or polish. Never use a stream of water on the piece part. Only quench the
piece part in water to cool it.
3. DO NOT grind or polish magnesium as it may catch on fire.
4. Make sure table locking knob is always tight.
5. Remove electrical plug from power source outlet when adjusting table, changing discs, or
removing or adjusting platen.
CAUTION:
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to these chemicals, work in
a well-ventilated area, and work with approved safety equipment, such as those dust
masks that are specifically designed to filter out microscopic particles.