7-1
Chapter 7Specification
Chapter 7 Specification
Model
DEM-1717
Table Size
X 450 × Y 440 mm ( 17.72 × 17.32 inch )
Table Load Weight
Max. 5 kgs ( 11 lbs )
Engraving Area
X 300 × Y 300 × Z 100 mm ( 12 × 12 × 4 inch )
Max. Engraving Speed
2500 mm/min ( 98 inch/min )
Engraving Material
Plastic ( ABS, Acrylic ) , Wood, Foam, Styrenefoam,
Modeling Wax, Epoxy Tooling Board…etc
Max. Material Thickness
100 mm ( 4 inch )
Software Resolution
0.02 mm (0.001 inch)
Mechanical Resolution
0.1 mm/step (0.004 inch/step)
Spindle Motor
200W Brushless DC Motor
Spindle Speed
Maximum Spindle Speed(Variable): 20000 RPM
Tool Diameter
ER11 Collet
Interface
USB 2.0
Power Supply
Input: 100-120VAC 4.8A
Output: 24VDC 8.8A
Input: 200-240VAC 2.8A
Output: 24VDC 8.8A
Power Consumption
3.0A
2.0A
Operating Noise Level
Stand By 39.6 dB(A)
No-loading operation less than 66 dB(A)
Machine Size
540 × 530 × 530 mm
( 21.26 × 20.87 × 20.87 inch )
Net Weight
32.50 kgs ( 71.5 lbs )
Operating Environment
Temperatures 5~40°C (41~104°F)
Humidity 35~80%
Accessories
Power Cord, USB 2.0 Cable, Controller, Wrench Set ( For spindle ×1
For nut ×1 ), Silicone Mat, Tungsten Carbide Tool, Clamp set ( big x 2
pcs, small x 2 pcs ), Support Board, Thin Paper, BravoProdigy Software
Installation USB, Operating Instructions, Engraving Material,
ER11 Collet .