4-4
Chapter 4 Warning Messages and Troubleshooting Tips
Q6. On the surface of the finished work, you realize some part of the pattern is missing.
Q7 . How do I replace a fuse.
Fuse Cap
Fuse Cap
Fuse Holder
Fuse Holder
Fuse
Fuse
ANS: The two most common possibilities are as follows:
1. It could be because the surface of the workpiece isn’t flat enough, and the starting point
happened to be set at a point that’s slightly higher up, that would cause something like this
to happen.
2. When the cutting tool broke in the middle of the job, that could also cause something like
this to happen.
ANS: Press the fuse cover tightly while turning it counter clockwise, take out the fuse coveand the
fuse, and then replace the fuse with another one with the same specifications as supplied by
the original manufacturer, and then insert the fuse cover and the new fuse back in the fuse
holder, and then press the cover tightly the same way while turning it clockwise.
ANS: Turn the fuse cover counter-clockwise with a flathead screwdriver?, take out the fuse cover
and the fuse, and then replace the fuse with another one with the same specifications as
supplied by the original manufacturer, and then reinsert the fuse cover back in the fuse holder
by turning it clockwise with your flathead screwdriver.
Desktop Family: BE2015, BE3030, BE3222, BE4036, BE4060, BE5070.
Cylinder Family: BC200, BC200L
Go to Chapter 2 (2-1 Hardware Features) for the location of the fuse and description.
Go to Chapter 12 (12-2 Part List) for the specifications of the fuse.
※