10
10
Anchoring the Machine
•
Once positioned, anchor the machine to the floor, as shown in
the diagram. Use bolts and expansion plugs or sunken tie rods
that connect through and are sized for the holes in the base of
the stand.
•
This machine requires a solid floor such as concrete at a
minimum of 4” (102mm) thick. 6” (153mm) minimum is preferred.
GETTING TO KNOW YOUR MACHINE
The English wheel stretches metal
workpieces thinner and longer as
they are rolled between the upper
wheel and lower wheel.
Simultaneously, a track is pressed
into the metal, creating a convex
curve in the workpiece. By varying
the amount and pattern of the
tracks, a wide variety of contours
can be produced.
The English wheel can be used to
produce curves in mild steel up to
10ga. (3.416mm) and aluminum up
to .125” (3.175mm).
Note
: Stock photo.
Item Description
A
Kick Wheel
B
Lower Wheel Assembly
C Quick Release Lever
D Lower Wheel Bracket
A
B
C
G
K
H
F
D
I
E
J
L
.31"
(7.87mm)
.50"
(12.7mm)
Содержание B8870
