background image

Range extension:

If you’re not getting the approximate quoted range out of your e-bike system, take the 
following steps:

1. Pedal Assist Sensor
If you haven’t installed the pedal assist sensor, you might not get the required range out 
of your kit. The pedal assist modes only work for pedal assist input, not throttle. If you 
use the throttle on low levels of pedal assist, this will not make any difference. Pedal 
assist levels are only for pedal assist. The throttle is great fun to use, but even moderate 
use of the throttle, with pedaling, is still going to burn through the juice a lot faster than 
on a low-medium pedal assist setting.
2. Battery Indicator Lights – Full Charge. The LED and LCD battery level displays are a 
basic indication of battery charge, but they are based on voltage which is variable and 
not a true indication of battery capacity. The only accurate indication of a full charge, is 
having charged the battery and the battery charger lights glowing green to indicate that 
the battery is fully charged.
3. LED/LCD Indicator Light – Running Low
Some customers find that the LED/LCD charge indicator can lead them astray in terms 
of how far the bike will go on low power. You don’t risk damaging the system by riding 
all the way to the controller low voltage cutoff. Keep riding on pedal assist even after the 
last battery indicator bar starts blinking.
4. Hills/ Riding Style/ Other Factors 
The ranges quoted are from real world testing, with some hills and some flat areas. If 
your commute involves a lot of hills, that’s going to impact on the range of the kit. 1,000W 
kits are especially susceptible to being drained a lot more on hills (more than 250W kits 
anyway). If you need to purchase a second charger to charge the battery at half way, or if 
you need an additional battery, they will be available for purchase online.
5. General Tips

• 

Make sure the wheels are running free (rubbing brakes can halve your range quite 
easily)

• 

Keep the battery topped up between uses

• 

Make sure the tyre pressures are at optimum

• 

Pedal harder when taking off and select the right gear for assisting up hills

25

TROUBLE SHOOTING CONTINUED...

Содержание BBS02



























Отзывы: